Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
CLASSIFICATION
Specially used for life test of shower heads and handshowers. The product's durability is tested by continuously alternating hot and cold water flow out.
This equipment is specially used for the hot and cold fatigue test of shower heads, faucets and other parts in the bathroom industry. Through hot and cold water cycle immersion, it can detect that the shower has no leakage,no cracks, no permanent obvious deformation or function reduction.
Suitable for intensive research in pharmaceutical, medical,biotechnology and all related industries including life sciences. Thev GMP principle requires long-term stability test conditions of 25℃/60%RH.Criteria for 6 months at 40℃/75%RH in accelerated tests, is the stability test system field of the pharmaceutical industry.Mainly simulate the environment of temperature, humidity, light test.
Nitrogen drying oven provides an anaerobic environment for drying or curing samples, usually we use carbon dioxide or nitrogen for anaerobic heat treatment. Nitrogen is relatively inert, it does not react with stored substances, and does not carry moisture, so nitrogen is often used as a standard medium for pollution-free storage in industrial and medical industries. Because nitrogen is denser than air being low in density, when nitrogen enters the oven, it immediately removes any contaminants or moisture the air may contain. Nitrogen ovens are often used in special fields such as medical treatment, chemical industry, glass manufacturing, metal processing, new materials, nuclear, rubber industry, electronics manufacturing, SMT industry, shipbuilding and aerospace industries.
PCT Aging Chamber (also known as PCT High Pressure Accelerated Aging Tester) is mainly used to test the moisture capacity of semiconductor packages. The products to be tested are tested under severe temperature, humidity and pressure. Moisture will flow along the colloid or colloid and wire. The interface of the frame penetrates into the package body, and the common failure mode is an open circuit caused by corrosion of the active metallization area, or a short circuit caused by contamination between the pins of the package body, etc.
Used in electronic and electrical components, automation components, communication components, auto parts, metals, rubber, defense industry, aerospace, military industry, Tina sub-chips, semiconductor ceramics and polymer materials.
The composite salt spray chamber is the closest to the actual natural conditions in the accelerated corrosion test. It is simulated by the conditions commonly encountered in the natural environment: such as salt spray, hot air drying, humidification, low temperature, etc., and can be cycled to do the test. In the test, the main test objects are used in environments with drastic changes, such as: auto parts, aviation equipment, building materials, coating films, electrical machines, etc.
Industrial delivery furnaces are fully functional and can be used for industrial annealing, drying and curing. Widely used in automotive industry, aerospace, such as motor rotor, stator, lithium battery, PCB curing and so on.
Add
No.5 Str. 3 Yinsha Rd., Shabian village Xiabian community, Changan Town, Dongguan City, Guangdong Province, China
这里是标题一h1占位文字
Add
No.5 Str. 3 Yinsha Rd., Shabian village Xiabian community, Changan Town, Dongguan City, Guangdong Province, China
Copyright © 2023 Guangdong Yuanyao Test Equipment Co., Ltd. All Rights Reserved Powered By: www.300.cn SEO
Share
