Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
CLASSIFICATION
Salt spray test chambers are used to artificially simulate salt spray corrosion environments, accelerating the assessment of the corrosion resistance of metallic materials, plating/coatings, electroplated parts, and rust-proofing layers. They are widely used in the automotive, electronics, hardware, and sanitary ware industries. They can perform NSS (neutral), ASS (acidic), and CASS (copper accelerated salt spray) tests, conforming to standards such as GB/T 10125, ISO 9227, and ASTM B117.
FORD standard CETP:00.00-L-467 Honda standard -40℃ CCT chamber
IPX8 immersion testing equipment is a professional device used to test the IPX8 waterproof rating of products. It primarily verifies the product's sealing performance and durability by simulating a deep-water, high-pressure environment.
Compliant Standards: IEC60529 "Degrees of protection provided by enclosures (IP Code)" GB4208 "Degrees of protection provided by enclosures (IP Code)" and GB7000.1 "Luminaires - Part 1: General requirements and tests," etc., regarding the relevant clauses for IPX7 waterproof rating testing.
The IPX6K rain test chamber is a device used to test the waterproof performance of products. It primarily conforms to standards such as IEC60529 and GB/T4208, simulating a high-pressure water flow impact environment to evaluate the product's waterproof capability under corresponding conditions.
The PX5X6 Waterproof Test Chamber (Downward Flushing) is a non-standard customized waterproof testing device designed according to standards such as IEC 60529 and ISO 20653, specifically for the needs of certain products. Its core functionality is to simulate vertical flushing from top to bottom, adapting to waterproof rating verification in special scenarios.
The IPX3X4 handheld showerhead waterproofing device is designed and manufactured according to relevant standards such as IEC60529 and GB4208.
PCT Aging Chamber (also known as PCT High Pressure Accelerated Aging Tester) is mainly used to test the moisture capacity of semiconductor packages. The products to be tested are tested under severe temperature, humidity and pressure. Moisture will flow along the colloid or colloid and wire. The interface of the frame penetrates into the package body, and the common failure mode is an open circuit caused by corrosion of the active metallization area, or a short circuit caused by contamination between the pins of the package body, etc.
The composite salt spray chamber is the closest to the actual natural conditions in the accelerated corrosion test. It is simulated by the conditions commonly encountered in the natural environment: such as salt spray, hot air drying, humidification, low temperature, etc., and can be cycled to do the test. In the test, the main test objects are used in environments with drastic changes, such as: auto parts, aviation equipment, building materials, coating films, electrical machines, etc.
Add
No.5 Str. 3 Yinsha Rd., Shabian village Xiabian community, Changan Town, Dongguan City, Guangdong Province, China
这里是标题一h1占位文字
Add
No.5 Str. 3 Yinsha Rd., Shabian village Xiabian community, Changan Town, Dongguan City, Guangdong Province, China
Copyright © 2023 Guangdong Yuanyao Test Equipment Co., Ltd. All Rights Reserved Powered By: www.300.cn SEO
Share
