全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

Industry Application

Home page

Medical industry

The stability, reliability and safety of medical products throughout their life cycle are the main concerns of the medical industry, which determines the necessity of testing medical products.

Medical devices need to undergo vibration tests, drop tests and other test items that comply with GB9706.1 IEC/EN 60601-1, the vibration tables and drop test machines are suitable.

Medication stability tests and Medication storage must control and monitor environmental conditions such as temperature, humidity, light, draw results and conclusions to ensure stable medication quality. Climate chamber, thermal shock chamber, rapid rate temperature chamber, etc. can provide the above services.

Research laboratories and production units serving the pharmaceutical market can use hot air ovens to test medications, or as thermal processing equipment in the packaging stage, with a temperature range of RT+25~200/300°C. According to different test requirements and sample materials, vacuum oven is also a good choice.

Application Product

Nitrogen Drying Oven

→

Nitrogen drying oven provides an anaerobic environment for drying or curing samples, usually we use carbon dioxide or nitrogen for anaerobic heat treatment. Nitrogen is relatively inert, it does not react with stored substances, and does not carry moisture, so nitrogen is often used as a standard medium for pollution-free storage in industrial and medical industries. Because nitrogen is denser than air being low in density, when nitrogen enters the oven, it immediately removes any contaminants or moisture the air may contain. Nitrogen ovens are often used in special fields such as medical treatment, chemical industry, glass manufacturing, metal processing, new materials, nuclear, rubber industry, electronics manufacturing, SMT industry, shipbuilding and aerospace industries.

PCT aging chamber

→

PCT Aging Chamber (also known as PCT High Pressure Accelerated Aging Tester) is mainly used to test the moisture capacity of semiconductor packages. The products to be tested are tested under severe temperature, humidity and pressure. Moisture will flow along the colloid or colloid and wire. The interface of the frame penetrates into the package body, and the common failure mode is an open circuit caused by corrosion of the active metallization area, or a short circuit caused by contamination between the pins of the package body, etc.

2 zones thermal shock chamber

→

Used in electronic and electrical components, automation components, communication components, auto parts, metals, rubber, defense industry, aerospace, military industry, Tina sub-chips, semiconductor ceramics and polymer materials.

Composite Salt Spray Chamber

→

The composite salt spray chamber is the closest to the actual natural conditions in the accelerated corrosion test. It is simulated by the conditions commonly encountered in the natural environment: such as salt spray, hot air drying, humidification, low temperature, etc., and can be cycled to do the test. In the test, the main test objects are used in environments with drastic changes, such as: auto parts, aviation equipment, building materials, coating films, electrical machines, etc.

Tunnel Oven

→

Industrial delivery furnaces are fully functional and can be used for industrial annealing, drying and curing. Widely used in automotive industry, aerospace, such as motor rotor, stator, lithium battery, PCB curing and so on.

Low frequency vibration tester

→

Widely used in national defense, aviation, communications, electronics, automobiles, home appliances and other industries.

3 zones thermal shock chamber

→

Simulated transportation vibration tester

→

Used in toys, electronics, furniture, gifts, ceramics, communications, equipment, computers and auto parts.