全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

Industry Application

Home page

Materials

Industrial materials are defined as materials used in the manufacture of "hard" goods, such as more or less durable machines and equipment produced for industry and consumers, such as metals, plastics, polymers, various materials need to be made before they can be applied reliability testing to ensure the durability of the material.

Material durability testing is an essential process, and environmental testing can save manufacturers time and money by helping materials create structures that meet specifications and are reliably manufactured. Material durability testing is specific simulation testing of materials to ensure products perform at their best. The best performance process can be achieved through tests such as alternating heat and humidity, high temperature aging, salt spray corrosion, and low temperature.

Application Product

Nitrogen Drying Oven

→

Nitrogen drying oven provides an anaerobic environment for drying or curing samples, usually we use carbon dioxide or nitrogen for anaerobic heat treatment. Nitrogen is relatively inert, it does not react with stored substances, and does not carry moisture, so nitrogen is often used as a standard medium for pollution-free storage in industrial and medical industries. Because nitrogen is denser than air being low in density, when nitrogen enters the oven, it immediately removes any contaminants or moisture the air may contain. Nitrogen ovens are often used in special fields such as medical treatment, chemical industry, glass manufacturing, metal processing, new materials, nuclear, rubber industry, electronics manufacturing, SMT industry, shipbuilding and aerospace industries.

PCT aging chamber

→

PCT Aging Chamber (also known as PCT High Pressure Accelerated Aging Tester) is mainly used to test the moisture capacity of semiconductor packages. The products to be tested are tested under severe temperature, humidity and pressure. Moisture will flow along the colloid or colloid and wire. The interface of the frame penetrates into the package body, and the common failure mode is an open circuit caused by corrosion of the active metallization area, or a short circuit caused by contamination between the pins of the package body, etc.

2 zones thermal shock chamber

→

Used in electronic and electrical components, automation components, communication components, auto parts, metals, rubber, defense industry, aerospace, military industry, Tina sub-chips, semiconductor ceramics and polymer materials.

Composite Salt Spray Chamber

→

The composite salt spray chamber is the closest to the actual natural conditions in the accelerated corrosion test. It is simulated by the conditions commonly encountered in the natural environment: such as salt spray, hot air drying, humidification, low temperature, etc., and can be cycled to do the test. In the test, the main test objects are used in environments with drastic changes, such as: auto parts, aviation equipment, building materials, coating films, electrical machines, etc.

Tunnel Oven

→

Industrial delivery furnaces are fully functional and can be used for industrial annealing, drying and curing. Widely used in automotive industry, aerospace, such as motor rotor, stator, lithium battery, PCB curing and so on.

Low frequency vibration tester

→

Widely used in national defense, aviation, communications, electronics, automobiles, home appliances and other industries.

3 zones thermal shock chamber

→

Simulated transportation vibration tester

→

Used in toys, electronics, furniture, gifts, ceramics, communications, equipment, computers and auto parts.