全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

Industry Application

Home page

Automotive

The operating environment of automotive is much harsher than that of general consumer electronics, involving reliability tests such as temperature, humidity, vibration, rain, light, and salt spray corrosion. Therefore, automotive manufacturers and auto parts manufacturers, ranging from automotive engines to small manufacturers of automotive interior products and automotive paints, will establish their own independent reliability testing laboratories to conduct testing in accordance with the industry's corresponding testing standards before the products leave the factory. For example, they will follow test standard IEC60068-2-1 to do low temperature storage and low temperature operation, ISO20653 to do dust proof and water proof test. . . Here, Yuanyao can provide you with a series of environmental test equipment to shorten the procurement time and transportation costs.

Application Product

Nitrogen Drying Oven

→

Nitrogen drying oven provides an anaerobic environment for drying or curing samples, usually we use carbon dioxide or nitrogen for anaerobic heat treatment. Nitrogen is relatively inert, it does not react with stored substances, and does not carry moisture, so nitrogen is often used as a standard medium for pollution-free storage in industrial and medical industries. Because nitrogen is denser than air being low in density, when nitrogen enters the oven, it immediately removes any contaminants or moisture the air may contain. Nitrogen ovens are often used in special fields such as medical treatment, chemical industry, glass manufacturing, metal processing, new materials, nuclear, rubber industry, electronics manufacturing, SMT industry, shipbuilding and aerospace industries.

PCT aging chamber

→

PCT Aging Chamber (also known as PCT High Pressure Accelerated Aging Tester) is mainly used to test the moisture capacity of semiconductor packages. The products to be tested are tested under severe temperature, humidity and pressure. Moisture will flow along the colloid or colloid and wire. The interface of the frame penetrates into the package body, and the common failure mode is an open circuit caused by corrosion of the active metallization area, or a short circuit caused by contamination between the pins of the package body, etc.

2 zones thermal shock chamber

→

Used in electronic and electrical components, automation components, communication components, auto parts, metals, rubber, defense industry, aerospace, military industry, Tina sub-chips, semiconductor ceramics and polymer materials.

Composite Salt Spray Chamber

→

The composite salt spray chamber is the closest to the actual natural conditions in the accelerated corrosion test. It is simulated by the conditions commonly encountered in the natural environment: such as salt spray, hot air drying, humidification, low temperature, etc., and can be cycled to do the test. In the test, the main test objects are used in environments with drastic changes, such as: auto parts, aviation equipment, building materials, coating films, electrical machines, etc.

Tunnel Oven

→

Industrial delivery furnaces are fully functional and can be used for industrial annealing, drying and curing. Widely used in automotive industry, aerospace, such as motor rotor, stator, lithium battery, PCB curing and so on.

Low frequency vibration tester

→

Widely used in national defense, aviation, communications, electronics, automobiles, home appliances and other industries.

3 zones thermal shock chamber

→

Simulated transportation vibration tester

→

Used in toys, electronics, furniture, gifts, ceramics, communications, equipment, computers and auto parts.